UHF RFID FIXED READER MODEL: RB8800 (Antenna Purchase Separately)

UHF RFID FIXED READER MODEL: RB8800 (Antenna Purchase Separately)

RM6,015.20

RB8800 is a high performance 8-port reader which can be well adapted to the installation requirements for indoor or outdoor environments. RB8800 reader is developed based on Impinj’s INDY R2000. It is a Reader easy to install and use with high performance. Using antenna connector of RP-TNC.

Antenna is not included in this purchase. You have to purchase separately according to your requirements.

Available on backorder

RB8800 is a high performance 8-port reader which can be well adapted to the installation requirements for indoor or outdoor environments. RB8800 reader is developed based on Impinj's INDY R2000. It is a Reader easy to install and use with high performance.

  • The performance of INDY R2000 to an extreme.
  • 24 hours×365 days non-stop.
  • Peak Inventory Speed: 700 tags/s.
  • GPIO control.
  • EPC C1 G2 and ISO 18000-6B protocols are both support.

Using antenna connector of RP-TNC.

Feature Description
1 Based on Indy R2000 chip RF transceiver is Impinj Indy R2000.
2 High performance anti-collision
algorithm
Unique I - Search multi-tags identification algorithm.
Provides the highest efficiency.
3 Optimized algorithm for a little of tags Better tag response time.
Optimized for small tag quantity applications.
4 Dual CPU architecture Main CPU is responsible for tag inventory, assistant CPU is responsible for data management. Inventory and data transfer are parallel and simultaneous. This feature improves the total performance significantly.
Assistant CPU is responsible for generating real random number.
Assistant CPU is responsible for system operating surveillance.
5 Fast 8 antenna switch inventory High speed inventory therefore antennas could be switched rapidly. The minimum inventory duration for an antenna is 30 mS.
Every antenna’s inventory duration is configurable.
6 Two inventory modes Buffer mode and real time mode.
In buffer mode, inventoried tag will be stored in buffer. This mode improves the efficiency of multi tag inventory.
In real time mode, inventoried tag will send the data in real time. This mode allows user to get tag’s data instantly.
7 Hardware system halt detection Hardware CPU status surveillance.
Run for 24hours X 365 days without system halt.
8 Low operation voltage Input voltage DC 12-18V.
9 Low power consumption Maximum out power only needs 600mA +/-10% (12V DC Input).
Low-power Mode, single tag only 300mA +/-10% (12V DC Input).
10 PA health surveillance PA status surveillance.
Make sure PA never works under saturated state. Protected it for long term operation.
11 18000-6B full compatible 100% 18000-6B compatible.
Can be switched rapidly between protocols.
12 18000-6B large data read/write Read 216 bytes in one time takes less than 500mS.
Write 216 bytes in one time takes less than 3.5 seconds.
Can also read/write data with various lengths.
Extremely stable (approximate 100% success rate).
13 Antenna connection detection Detect antenna connection.
RF receiver is protected by it.
Can be cancelled by command.
14 Excellent industrial design CNC aluminum body which is a classic model in the industry.
15 High quality connector system All the connector be used are famous brand products with best quality. Ensure a reliable connection.
16 Excellent onboard power system 8 independent power supplies on board. Every unit is supplied independently.
Each power supply has soft start function. Improves the stability of the power supply system.
17 Multi-board temperature sensor Multi point surveillance, Accurate monitoring system operating temperature.
18 Dual backup power output correction Make sure output power can be fine adjusted.
Two mutually backup power parity modules. Unless also damaged, the system can operate normally.
19 Concise and effective command system Serial communication interface.
Simple, convenient and effective for easy integration.
20 Excellent thermal design All heating devices have thermal structure.
A large area of heat sink contact surface.
Thermal coupling interface using high thermal conductivity solid materials which are non-volatile under high temperature.
CNC aluminum body, long-term continuous operation without heat.

 

Electrical Characteristics: -

Dimension 230mm(L) x 160mm(W) x 28mm(H)
Weight 1.8 Kg
Body Material Die-cast aluminum
Input Voltage DC 12V – 18V
Standby Mode Current <30mA
Sleep Mode Current <100uA
Max Operating Current 600mA  +/-5% @ DC 12V Input
Operating Temperature  - 20 °C  -  + 55  °C
Storage Temperature - 20 °C  -  + 85  °C
Humidity < 95% ( + 25 °C)
Air Interface Protocol EPC global UHF Class 1 Gen 2 / ISO 18000-6C
ISO 18000-6B
Spectrum Range 860Mhz – 960Mhz
Supported Regions US, Canada and other regions following U.S. FCC
Europe and other regions following ETSI EN 302 208 with & without LBT regulations
Mainland China
Japan
Korea
Malaysia
Taiwan
Output Power 0 – 33dBm
Output Power Precision +/- 1dB
Output Power Flatness +/- 0.2dB
Receive Sensitivity < -85 dBm
Peak Inventory Speed >700 tags/sec
Tag Buffer Capacity 1000 tags @ 96 bit EPC
Tag RSSI Supported
Antenna Detector Supported
Ambient Temp Monitor Supported
Working Mode Single/DRM
Host Communication RS-232 or TCP/IP
GPIO 2 inputs optical coupling  2 outputs optical coupling
Max Baud Rate 115200 bps
Heat Dissipation Air cooling

 

Delivery Note:

  1. Antenna is not included. You have to purchase separately.
  2. Local Malaysia Courier Chargers are inclusive.
  3. Other than Malaysia, extra courier charges are needed to deliver to your location. Please contact us for the courier charges.
Weight 2.5 kg
Dimensions 30 × 25 × 10 cm
What's in the box?

A Reader, a power adapter, a serial-USB cable, an Ethernet cable, a 8-port GPIO extender.

Warranty

Local Manufacturer Warranty. Warranty Period: 1 Year. Warranty Policy: Upon manufacturer's defects.

RB8800 is a high performance 8-port reader which can be well adapted to the installation requirements for indoor or outdoor environments. RB8800 reader is developed based on Impinj’s INDY R2000.